Snap Rings With Rectangular Profile For Shafts

Shaft retaining ring, steel wire retaining ring, retaining ring advantages:
1. Excellent corrosion resistance of retaining ring: The retaining ring can withstand all strong acids (including aqua regia), strong oxidizing agents, reducing agents, and various organic solvents in addition to molten alkali metals, fluorinated media, and sodium hydroxide higher than 300℃.
2. Strong insulation resistance: not affected by the environment and frequency, volume resistance up to 1018 ohm? cm, small dielectric loss, and high wear voltage.
3. The retaining ring has excellent resistance to high and low temperatures: little change to the influence of temperature, wide temperature range, and can be used at -190℃ and +260℃.
4. Unique self-lubrication of retaining ring: The retaining ring has the smallest coefficient of friction among plastics, which is an ideal oil-free lubrication material.
5. Outstanding surface non-adhesion: No known solid material can adhere to the surface, it is a solid material with minimum surface energy.
6. Retaining ring excellent resistance to atmospheric aging: irradiation resistance and low permeability - long-term exposure to the atmosphere, the surface and performance remain unchanged.
The retaining ring is fastened to the shaft of the ring-shaped machine parts, which can prevent the other parts mounted on the shaft from tampering. The retaining ring mainly plays the role of axial fixation, in which the tapered surface plus the retaining ring is fixed with a high degree of centering. Rolling bearing retaining ring is equivalent to a movable retaining edge, is used to stall roller with, easy to install. The structure of the retaining ring has a flat retaining ring, oblique retaining ring, and in the retaining ring.    

Steel wire shaft with retaining ring to play a fixed role in the coil, mainly used for parts of the fixed, to prevent the chaotic, retaining ring has a high strength, hardness, elasticity, and other features
The retaining ring mainly plays the role of axial fixation, in which the conical surface plus the retaining ring is fixed with a high degree of centering. Retaining ring is generally used for axial positioning, sub-shaft retaining ring, hole retaining ring, open retaining ring, etc., the general material 65Mn is used more, and specifications vary. The retaining ring is a wider use of carbon spring steel, compared with 65 steel, with high strength, hardness, elasticity, and hardenability, The critical quenching diameter in the water is generally 30 ~ 50mm, and the oil is generally 16-32mm, heat treatment with superheat sensitivity and tempering brittleness tendency, water quenching is easy to crack, the general use of oil quenching, retaining ring cross-section size > 80 should be quenched and oil-cooled water: annealed cutting still good, but the Cold deformation plasticity is low, poor welding performance. This retaining ring is generally used after shearing, and medium-temperature tempering.    

Size Can also be According to the Customer's requirement please check the detailed specification sheet details PDF， CAD, 15-16Page See more product details.    

Packing: The inner packaging consists of polyfoam, while the outer layer is a carton. The carton sizes are 29*19*19.5 cm and 23.5*17.5*8 cm, respectively. The pallet dimensions are 215*100*90 cm, or they can be customized according to your requirements.