Call Us

+86 136 6007 9809

Washers, Circlips, Rings, Seals, O-Rings&Nut plates&Clip Nuts

Q813 Clamping sleeve type straight connection body for next door&24° Cone Connectors - Bulkhead Union

Material:Stainless steel SUS304.316,Carbon steel ,Brass    

Standard:Q813    


Share:

Product Specification

Material: Stainless Steel
Surface treatment: galvanized passivated
There should be no cracks, pores, burrs, sharp edges, rust spots, and other defects that affect the use. Among them, thread AQL=1.5, ferrule end size AQL=1.5, and other sizes AQL=4.0. Specific practice is that a fitting body is used as a female body, and the nut and ferrule can be pressed onto the tube. There are mainly ferrule-type straight-through fittings, ferrule-type end straight-through fittings, ferrule-type tee fittings, and other types.Flared fittings are of the type shown in Figure 8 and consist of three parts: fitting body, bushing, and nut. The steel pipe port flare angle is 37°. The 37° flare angle of the steel pipe is pressed against the tapered surface of the fitting body to form a metal seal. The use of a bushing absorbs and reduces line vibration and tube fatigue, and the tube does not rotate when the nut is tightened.
1. There are two types of connection threads for flare fittings: metric threads and U.S. JIC threads.
2. Flare fittings are easy to install, do not require welding, and are widely used in low and medium-pressure piping systems. Since they are metal-to-metal hard seals, they are suitable for a wide range of temperatures.    


Yor-Lok Fittings for Steel Tubing.For Use With Air, Cutting Oil, Diesel Fuel, Fuel Oil, Gasoline, Hydraulic Fluid, Mineral Oil
Tubing: Use with seamless steel
Specifications Met: See table
These fittings include a nut with two sleeves (ferrules) for extra gripping power. The sleeves bite into the tubing as you tighten the nut, creating a strong seal. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. Fittings are zinc-plated steel for fair corrosion resistance. They are compatible with Swagelok®, Let-Lok, and A-Lok fittings.    


Size Can also be According to the Customer's requirement please check the detailed specification sheet details PDF, CAD, 103-104 Page See more product details.    

Product Packaging

Packing: The inner packaging consists of polyfoam, while the outer layer is a carton. The carton sizes are 29*19*19.5 cm and 23.5*17.5*8 cm, respectively. The pallet dimensions are 215*100*90 cm, or they can be customized according to your requirements.

Product Pictures

Q813 Clamping sleeve type straight connection body for next door

Contact Us

Tel.:

+86 020 8621 0320

+86 020 3121 6067

Mobile: +86 136 6007 9809

Technical Support:

SEND INQUIREY

Copyright © Guangzhou Juxin Development Co., Ltd. All Rights Reserved | Sitemap