Q802 Hexagon thin nuts for sleeve type pipe joint&Metric 18-8 Stainless Steel Thin Hex Nuts

Metric Medium-Strength Steel Thin Hex Nuts.Half as thick as regular hex nuts, these metric nuts fit into spaces with low-height clearances. They’re a good choice for fastening most machinery and equipment. Also known as jam nuts, they can be threaded together to form a locknut that won’t move or loosen due to vibration. When fastening a threaded rod, you can use two nuts to create a point for tightening the rod with a wrench. These nuts have less tensile strength than a standard hex nut when used alone. Made of steel, they’re best for dry environments since moisture and chemicals will cause them to rust.
Zinc- and zinc yellow-chromate plated steel nuts resist corrosion in wet environments. Blue-dyed steel nuts are easy to distinguish from inch nuts.DIN 936 nuts are sometimes taller and wider than ISO 4035 nuts. Although it’s no longer active, DIN 936 is still a commonly referenced standard for material and dimensional compatibility.
ISO 4035 (formerly DIN 439B) nuts are chamfered, so their edges are less sharp than DIN 936 nuts. This new ISO standard is functionally the same as the DIN standard it replaced, with slightly different tolerances for width.    

Metric 18-8 Stainless Steel Thin Hex Nuts. Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts but aren’t as strong. Commonly used as locknuts, threading a thin nut against any other hex nut prevents loosening caused by vibration. You can also use them as jam nuts by threading two of these thin nuts against each other on a threaded rod to create a gripping point for turning the rod without damaging its threads. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.
DIN 936 nuts are sometimes taller and wider than ISO 4035 nuts. Although it’s no longer active, DIN 936 is still a commonly referenced standard for material and dimensional compatibility.
ISO 4035 nuts are functionally the same as DIN 439B nuts (sometimes called DIN 439-2), but have slightly different width tolerances. These nuts have chamfered edges that make them less sharp than DIN 936 nuts.    

Size Can also be According to the Customer's requirement please check the detailed specification sheet details PDF， CAD, 99-100 Page See more product details.    

Packing: The inner packaging consists of polyfoam, while the outer layer is a carton. The carton sizes are 29*19*19.5 cm and 23.5*17.5*8 cm, respectively. The pallet dimensions are 215*100*90 cm, or they can be customized according to your requirements.