Inverted Retaining KLMNOPQ Rings(893.1)

Installed in the round hole, used as a fixed part of the axial movement, the outer diameter of these retaining rings than the assembly of the diameter of the round hole diameter is slightly larger. When installing the retaining ring, it is necessary to use the spring pliers, insert the jaws into the hole of the retaining ring, and clamp the retaining ring to put it into the pre-processed round hole groove.
1. A hole retaining ring generally has 2 small holes, because there are small holes so assembly and disassembly are more convenient, and there is eccentric elasticity is better.
2. The stop ring has no small holes and no eccentricity, so it is more troublesome to assemble and cannot be disassembled, and its elasticity is also poor.
3. Stop ring ID and OD can be used as long as the size is suitable, while the hole can only be used with OD because there are 2 small holes inside.    

The retaining ring, also known as circlip, is divided into a hole retaining ring and a shaft retaining ring, the role of axial limit, can prevent other parts of the axial movement. The molding process mostly uses plate punching, the functional cross-section is conical, and after assembly is mostly "linear contact" Part of the large-size models are made of wire winding molding, punching excess material process, the cross-section is a regular rectangle after assembly is "surface contact". A hole retaining ring can also be called a hole retaining ring, hole retaining card, hole retaining ring, hole retaining ring, hole retaining spring, or hole retaining ring. Installed in the hole, used to fix the axial movement of parts, the outer diameter of these retaining rings is slightly larger than the diameter of the assembly hole. Installation must use the spring pliers, which will be inserted into the jaws of the retaining ring of the jaw hole, clamping the retaining ring, in order to put it into the pre-processed round hole groove. The main materials for hole-retaining rings are carbon spring steel and stainless steel. Hole retaining rings can be divided into two types according to the use: hole with elastic retaining ring and reverse hole with elastic retaining ring.    

Size Can also be According to the Customer's requirement please check the detailed specification sheet details PDF， CAD, 47-48 Page See more product details.    

Packing: The inner packaging consists of polyfoam, while the outer layer is a carton. The carton sizes are 29*19*19.5 cm and 23.5*17.5*8 cm, respectively. The pallet dimensions are 215*100*90 cm, or they can be customized according to your requirements.