Clip, Rod End Clevis, Lh

Clevis and Yoke Ends, Male 1/2-20 LH 0.375 Pin Holes Stainless Steel Turned Construction. Material: 300-series stainless steel. The steel has medium machinability, low cold deformation plasticity, poor weldability, no tempering brittleness during heat treatment, but low hardenability, the critical diameter in water is 13-30mm, and there is a tendency to crack when water quenching. This steel is usually used after heat treatment such as normalizing, quenching tempering, or high-frequency surface quenching.
Mass fraction % : C0.47-0.55, Si0.17-0.37, Mn0.5-0.80, P≤0.035, S≤0.035, Ni≤0.30, Cr≤0.15, Cu≤0.25
1. High strength: No. 50 steel is a high-strength medium carbon structural steel, its tensile strength and yield strength are high, suitable for parts under large loads.
2. Low cold deformation capacity: due to its moderate carbon content, the cold deformation capacity of No. 50 steel is low, which is not suitable for parts requiring large deformation.
3. Medium machinability: The machinability of No. 50 steel is medium, and it is suitable for parts manufacturing by cutting.
4. Poor weldability: The weldability of No. 50 steel is poor, and cracks may appear in the welding process, so attention should be paid to choosing the appropriate welding process in the design.    

50 steel is a medium carbon high-strength carbon structural steel, a common steel, widely used in the industrial field, especially the plate, and is a typical cold work die steel material, often as a machine factory processing raw materials, to produce a variety of mechanical parts. Characteristics: The steel has medium machinability, low cold deformation plasticity, poor weldability, no tempering brittleness during heat treatment, but low hardenability, the critical diameter in water is 13-30mm, and the tendency to crack when water quenching. This steel is usually used after heat treatment such as normalizing, quenching tempering, or high-frequency surface quenching. No. 50 steel is a medium carbon high-strength carbon structural steel, a common steel, widely used in the industrial field, especially the plate, and is a typical cold work die steel material, often as a machine factory processing raw materials, to produce a variety of mechanical parts.
Supply condition, no heat treatment, hardness ≤241HBS; Annealed, hardness ≤207HBS    

Size Can also be According to the Customer's requirement please check the detailed specification sheet details PDF， CAD, 75-76 Page See more product details.    

Packing: The inner packaging consists of polyfoam, while the outer layer is a carton. The carton sizes are 29*19*19.5 cm and 23.5*17.5*8 cm, respectively. The pallet dimensions are 215*100*90 cm, or they can be customized according to your requirements.