Call Us

+86 136 6007 9809

Steel

Countersunk Head Closed End Round Body Knurled Blind Rivet Nuts—Closed End

Name: Countersunk Head Closed end Round Body Knurled Plain Blind Rivet Nuts—Closed End

Size: M3、M4、M5、M6、M8、M10

Material: Steel

Surface treatment: ROHS Blue Zinc

Grip Range: 0.5-4.5mm

Rivet Nut Countersunk Knurled Closed End, also referred to as Rivnuts, Blind Nuts, and blind threaded rivet nuts, are an internally threaded insert often used when the thickness of the application at hand is too small to tap a standard thread.

Using rivet nuts creates a vital thread in thin sheets of material for high-strength fastening from bolts and other threaded articles.

The full countersunk head is chosen over a reduced countersunk head type due to its more robust nature. However, it is also deeper, meaning it can only be used in material thicknesses greater than 1.5mm. Where the thickness of the application is smaller, the reduced countersunk type is often chosen instead. Both types offer a flush, finished appearance to the application.

The knurled body on the rivet nut provides excellent resistance to movement within the application than knurling under the head, especially when installed in softer materials. The closed-end blocks any form of contamination getting to the component and also prevents the use of screws that are too long for the application.

Installing these rivet nuts is simple: using a unique tool with a threaded stud, or nose, that engages with the internal threads of the rivet nut and pulls upwards, deforming the unthreaded section of the rivet nut to expand under the reverse side of the material – providing a high strength permanent thread in a thin sheet material. Blind rivet nut setting tool install.

Rivet Nut Countersunk Knurled Closed End are available in diameters from M3 to M12 to suit various grip ranges.

Available at Juxin fasteners in zinc-plated steel, A2 stainless steel, and A4 stainless steel as standard.

Non-standard sizes and materials are available to order as specials, including small-volume manufacture, modifications, and bespoke parts made to drawings. Minimum order quantities apply.


Share:

Product Specification

Material: Steel (finished in Zinc Plate-Yellow Dichromatic DIN 50961 Fe/Zn 8, C).

Note: RoHS-compliant Trivalent Plating is available upon request.

Hardware compatibility: Compatible with grade 2, grade 5, class 8.8, and class 9.8.

Available thread sizes and diameters Thread-Metric Diameter (mm)

M4 x 0.7 11.5

M5 x 0.8 13.0

M6 x 1.0 17.0

M8 x 1.25 19.0

M10 x 1.5 21.0

Countersunk, Closed-end Knurled Rivet Nut Application Notes:

The grip range of these outserts can be affected by the type of sheet material being used. It is recommended that a few test installations be conducted to determine the appropriate grip range for your specific application. The countersunk head, knurled, European-style rivnut, is installed using pneumatic, hydraulic, or manual hand tools. The installation process is simple, easily controlled, and less labor-intensive than other processes associated with nuts and bolts. When properly inserted, the rivnut head will be flush with the surrounding sheet material.

These industrial fasteners will do the job for flush installation and excellent spin-out resistance. They can effectively reduce assembly costs by eliminating processes associated with the assembly of nuts and bolts.

The thread area is enclosed, which prevents leakage past the threads from either side of your application. These rivet nuts have a ribbed body to hold them in place when tightening a screw. The body and flange are zinc yellow-chromate plated steel for corrosion resistance. Install in a drilled hole using a rivet nut tool. The tool collapses the nut, creating a backside flange that holds the nut to the material. Length is measured from under the flange. Installed length is the maximum length of the barrel when installed.

Size Can also be According to Customer's requirement and please check detailed specification sheet PDF, CAD, See more product details, PDF 93-94 Page

Product Packaging

The inner packaging is a plastic bag, and the outer packaging is a carton. Then the tray. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size: 215*100*90CM, or as your request

Product Pictures

Countersunk Head Closed End  Round Body Knurled Blind Rivet Nuts—Closed End


Countersunk Head Closed End  Round Body Knurled Blind Rivet Nuts—Closed End

Contact Us

Tel.:

+86 020 8621 0320

+86 020 3121 6067

Mobile: +86 136 6007 9809

Technical Support:

SEND INQUIREY

Copyright © Guangzhou Juxin Development Co., Ltd. All Rights Reserved | Sitemap