Call Us
+86 136 6007 9809
Call Us
+86 136 6007 9809
Material: Carbon steel, Stainless steel SUS304, SUS316, A2-70, A4-80
Standard: Q260&GB 6564 &ANSI/ASME B 18.3
Metric Thread-Forming Screws for Soft Metal: These screws have a triangular shank that presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper. They're also known as Taptite screws. Made from steel, they use zinc-plated steel to resist corrosion in wet environments. Length is measured from under the head.
Screws with a Torx-Plus drive allow you to apply extra force with less slippage or damage to the recess.
Screws that meet DIN 7500 adhere to international standards for thread-forming screw dimensions. The letter at the end of the standard refers to the crew's drive type—C for Phillips and D for hex head.
Steel Rounded Head Thread-Cutting Screws for Metal: These steel screws are zinc plated to resist corrosion in wet environments. They cut threads in drilled holes they're turned, so they require less driving torque and cause less stress on your material than thread-forming screws. Length is measured from under the head.
Screws meet ASME B18.6.3 dimensional standards. They also meet SAE J933 for material quality.
High-Strength 410 Stainless Steel Rounded Head Blunt Screws for Sheet Metal： Stronger and more wear-resistant than 18-8 and 316 stainless steel, these screws are magnetic and mildly chemical resistanThey's not for use with aluminum sheet metal. Often referred to as Type B thread-forming screws, they require a drilled hole and are typically used in 0. "50"-0."00" material. Length is measured from under the head.
Thread-Forming Screws for Soft Metal： The triangular shank presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper. Also known as Taptite® screws, they have a Torx-Plus drive that allows you to apply extra force with less slippage or damage to the recess. Made from steel, they're coated or plated steel to resist corrosion in wet environments. Length is measured from under the head.
Product Specification
Name: Stainless Steel Torx Rounded Head Thread-Forming Screws for Plastic&Steel Torx Rounded Head Thread-Forming Screws for Plastic
Material: Carbon steel, Stainless steel SUS304, SUS316, A2-70, A4-80
1. These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. A Torx or Torx Plus drive provides more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess. Comparable to Plastite screws, these screws have a triangular shank that presses tightly against formable plastic such as polypropylene to resist loosening. Length is measured from under the head
2. These steel screws have a black-oxide or zinc-plated finish to resist corrosion. A Torx Plus drive provides more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess. Comparable to Plastite screws, these screws have a triangular shank that presses tightly against formable plastic such as polypropylene to resist loosening. Length is measured from under the head. Black-oxide steel screws won’t rust in dry environments. Zinc-plated steel screws won’t rust in wet environments.
Size Can also be According to the Customer's requirement for manufacturing, please check the detailed specification sheet details PDF, CAD, 155-156 Page See more product details.
Product Packaging
Packaging: The inner packaging is a plastic bag, and the outer packaging is a carton. Then the tray. Carton size: 29*19*19.5cm and 23.5*17.5*8, cm and pallet size: 215*100*90cm, or as your request.
Product Pictures
Contact Us
Tel.:
+86 020 8621 0320
+86 020 3121 6067
Technical Support:
Navigation
SEND INQUIREY
