The method of testing the strength of the blind rivet nut industry solutions

1. The first thing to do is to screw the blind rivet nut into the threaded core but make sure that the applied load lasts for 15 seconds. At this point, if the strength is good, there will be no fracture; remove the load and take the blind rivet nut out. The chuck should not move faster than 3 mm/min when performing the test. If the threaded mandrel is damaged during the test, the test will be canceled.

2. Screw the blind rivet nut into the threaded mandrel to apply the load until it breaks and should not die at the intersection of the head and the cylindrical section. Move the collet as slowly as possible during the experiment, no more than 3 mm/min. During the test, if the threaded mandrel is damaged, the test is invalidated.

3. The blind rivet nut is riveted to the rivet plate, and the test bolt is screwed into the test bolt without any lubrication. At this point, start applying pressure until the blind rivet nut cracks or breaks. During the experiment, the torque measurement error of the tool should not be greater than the rated torque. The thickness and hole of the rivet plate should be determined according to the rivet thickness H and D0 or S0 recommended by the product standard.

4. Rivet the blind rivet nut to the rivet plate and tighten the test bolt without lubrication; apply torque until relative rotation occurs between the blind rivet nut and the rivet plate. The torque measurement error of the torque tester or tool used in the test should not exceed the quotas h and d0.

The blind rivet nut is used to solve the problem of thin plate connection and is known as the gospel of light plate connection. Still, different shapes, hole depths, and specifications of the blind rivet nut riveted size are not the same. Still, they are riveted to the same plate thickness range, usually between 0.5mm-13mm, and can be customized according to customer requirements and customized production of suitable blind rivet nuts. If it is a very thick plate, you can tap it, but usually, if the plate is not conducive to tapping or there is a need for single-sided riveting, it must be used to pull rivet nuts. Blind rivet nuts are suitable for metal panels in the range of 0.5mm-13mm.

Suppose you are looking for high-quality screws and blind rivet nuts fasteners or technical support for structural design, welcome to contact me. Thanks.Email:adelajonly@gmail.com

Website: https://www.juxinfasteners.com