Self-Clinching Nuts - Types JX-S, JX-SS, JX-CLS, JX-CLA, JX-SP - Unified

Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut, making the fastener an integral part of the sheet. A serrated clinching ring prevents the fastener from rotating after installation. Provide load-bearing threads in thin sheets with high pushout and torque-out resistance.

1. Type CLA is recommended for use in steel or aluminum sheets. HRB (Rockwell "B" scale) is 50 or less, and HB (Hardness Brinell) is 82 or less.

2. Types CLS  are recommended for use in steel or aluminum sheets HRB (Rockwell "B" scale) 70 or less and HB (Hardness Brinell) 125 or less.

3. Types S / SS are recommended for steel or aluminum sheet use. HRB (Rockwell "B" scale) is 80 or less, and HB (Hardness Brinell) is 150 or less.

4. Type SP is recommended for use in stainless steel sheets HRB (Rockwell "B" scale) 90 or less and HB (Hardness Brinell) 185 or less.

Stainless steel Standoffs for Sheet Metal Fasteners

Thru-Hole Threaded Standoffs for Installation into Stainless Steel - Type JX-SOO, JX-SOOS - Unified

These steel standoffs for metal fasteners, which use the proven self-clinching design, are installed with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet. Types SOO and SOOS standoffs are for installation into stainless steel sheets as thin as .040".Please get in touch with us if you require a standoff that we do not offer in this bulletin. We will be happy to work with you to satisfy your particular needs.

These standoffs, which use the proven self-clinching design, are installed with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet. Types JX-SOO and JX-SOOS standoffs are for installation into stainless steel sheets as thin as 1.02mm. Please get in touch with us if you require a standoff that we do not offer in this bulletin. We will be happy to work with you to satisfy your particular needs.

Blind Threaded Standoffs for metal fasteners – Types JX-BSO, JX-BSOA, JX-BSOS

These stainless steel standoffs for metal fasteners, which use the proven self-clinching dare installed with a squeeze in properly sized round holes, are permanently mounted in the thin sheet. When blind-threaded types are used, outer sheet surfaces are not only flush but closed as well. Please get in touch with us if you require a standoff that we do not offer in this bulletin. We will be happy to work with you to satisfy your particular needs.

Thru-hole Threaded Standoffs for metal fasteners - Types JX-SO, JX-SOA, JX-SOS - Unified

These standoffs, which use the proven self-clinching design, are installed with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet. Thru-hole threaded standoffs are installed with their heads flush with one surface of the mounting sheet.