High-Quality Blind Rivet Nuts in Nylon Industrial solutions for use on metal, fiberglass, plastic, and hardboards.

Nylon blind rivet nuts (nylon rivet nuts, nylon insert nuts) are used in blind holes in the conclusion of the two thin plate surfaces. It combines an aluminum alloy nut with a scored surface securely attached to a diagonally backed nylon sleeve. The nylon pull cap can be easily pressed into the drilled or punched holes with fingers, and then the specified diameter and length specifications of the screws are screwed in. A manual screwdriver is used to lock until the nut is pulled up to the shoulder of the casing so that the top of the casing is expanded from the inside and tightly fixed to the back of the sheet.

1. It is easy to install and does not require special tools.

2. The elasticity of the nylon casing allows the cap to be in the secure hole and complete the assembly.

3. It can be used on metal, fiberglass, plastic, and hardboard.

4. Nylon sleeve and aluminum nut can avoid corrosion and reduce noise and vibration.

5. Simply remove the screws and push the nut back to the bottom to reuse.

Features

• No special installation tooling is needed

• Covers all grip thicknesses

• Spring tension nylon cage holds the nut securely until the final assembly is made

• Protects brittle or painted surfaces as only the nylon cage comes into contact with the sheet or other metal

• Made from corrosion-resisting material