Titanium Nylon-Insert Locknuts

Material: Titanium Grey Oxide, Polishing, Anodizing

Standard: Q 329, ISO 10512, ISO 7040, ISO 12125, ISO 7040, ISO 7043, ISO 10511, DIN EN ISO 7040, ASME B 18.16.6, GB /T 6172.2, GB /T 6182, GB /T 889.1, Q 326, Q 328, DIN 985, DIN 6924, DIN 982.

1. Mil. Spec. Low-Strength Steel Thin Nylon-Insert Locknuts. Choose these locknuts for their adherence to strict military standards for material and construction. About half the height of standard nylon-insert locknuts, use them in light-duty low-clearance applications or jam one against a hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. A cadmium yellow-chromate plating provides corrosion resistance in wet environments and adds lubricity so they thread on smoothly.

2. High-Strength Steel Thin Heavy Nylon-Insert Locknuts. About half the height and 10% wider than standard nylon-insert locknuts, these locknuts are often referred to as thin heavy locknuts. Use them in low-clearance applications or jam one against a heavy hex nut to hold it in place. The nylon insert grips the bolt to resist loosening without damaging threads. They're reusable, but their holding power lessens with each use. Comparable in strength to Grade 8 bolts, these locknuts are about three times stronger than the same locknut made with low-strength steel.

Steel locknuts without a finish are ready to be welded, painted, and finished. Black-phosphate steel locknuts resist corrosion in wet environments.