Non-standard the inner sleeve round nut

The inner sleeve is a round nut in non-standard hardware fastening fittings. Because the outer diameter is round, there are three grooves in the outer diameter, and the inner hole is threaded. The inner set of teeth is made of steel after quenching and tempering treatment, which is formed by cold forging and cold extrusion of a forming machine, then processed by two main processes such as threading by a tapping machine. Mainly include: metric M5, M6, M8 and imperial3/16, 10-32, 1/4, 5/16, 3/8, etc. The inner set is a non-standard product, the outer diameter can be as small as 5mm and as large as 30mm. The outer diameter of the inner hole can reach a minimum of 3mm and a maximum of 28mm. The length (thickness) can reach a minimum of 5mm and a maximum of 35mm. The products are mainly suitable for hardware fastening accessories in machinery, furniture, electrical appliances, electronics/computers, automobiles, sports equipment, and other industries. The products are all imported wire rods after quenching and tempering treatment. The performance of the steel is uniform, which makes the product quality stable and improves the product's service life the appearance is smooth without scratches.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*92CM, or as your requirement.