Stainless Steel Hollow Rivets

Name: Stainless steel Semi-tubular rivets

Material: Stainless steel 

Size:1/8",9/64",5/32",3/16",7/32",1/4",5/16",3/8",1/2"

Semi-tubular rivets (also known as tubular rivets) are essentially the same as solid rivets, but with a shallow hole at the tip, opposite the head. This hole causes the tubular portion of the rivet (around the hole) to roll outward when force is applied. This reduces the amount of force needed for installation—tubular rivets require roughly ¼ the force of solid rivets. Semi-tubular rivets are often the preferred rivet style for joints where movement is required (pivot points) because the rivet material only swells at the tail. Common applications for tubular rivets include light fixtures, HVAC ducts, electronics, ladders, and brakes, among many others. Juxin Enterprise carries a huge inventory of semi-tubular rivets, in a variety of sizes, materials, and head styles. The bearing surface for the oval and truss head rivets shall be at right angles with the body within 2 degrees. The eccentricity of the rivet head to the shank, unevenness of the tubular end, surface seams, or other imperfections shall not be such that the usability of the rivet will be impaired. The Radius of the fillet under the head of the oval and truss head rivets shall not exceed the values in the standards shown. Materials of semi-tubular rivets shall be low-carbon steel (0.1 of 1 percent carbon or less).

1. All dimensions are in inches.

2. Rivet length is measured from the underside of the rivet head.

3. The hole depth to point of the apex shall not be greater than the shank length.

4. Because the heads of these rivets are not machined or trimmed the circumference may be

somewhat irregular and edges may be rounded or flat. Follow the links below to find tubular rivets for your project,18-8 stainless steel rivets are solidly built fasteners that can be used for heavy-duty applications. They are hollow throughout the middle and have a tubular or semi-tubular design with an oval or truss head. Stainless steel tubular rivets are installed with a rivet hammer or squeezer and are implemented into pre-drilled holes. The rivet gun or hammer causes the stainless steel hollow rivets to roll, which then attaches permanently to the two previously separate parts. request a quote, or contact us to learn more.

Size Can also be According to the Customer's requirement please check the detailed specification sheet details PDF, CAD, 1-2Page See more product details.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8 CM and pallet size is: 215*100*90CM, or as your requirement.