Call Us

+86 136 6007 9809

Fasteners for Plastic

M10 Brass Tapered Heat-Set Inserts for Plastic

Material: Stainless steel. Steel, Brass

Share:

Product Specification

Name: Tapered Heat-Set Inserts for Plastic

Material: Stainless steel. Steel, Brass

Size: Size: 2-56, 4-40, 6-32, 8-32, 10-24, 10-32, 1/4-20", 5/16-18", 3/8-16, 1/2-13"M3, M4, M5, M6, M8, M10


The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a square hole, then taper the top half. Heat inserts with a soldering tip so that they melt the plastic when installed. As the plastic cools, it solidifies around the knurls and ridges on the insert for excellent resistance to both torque and pull-out. Made with lead, brass inserts are stronger than aluminum and other brass alloys but not as strong as 303 stainless steel inserts. They have good corrosion resistance. Aluminum inserts are 70% lighter than brass and stainless steel inserts, have good corrosion resistance and are lead-free. Since they’re lead-free, they can be safely recycled.303 stainless steel inserts are stronger than brass and aluminum inserts, have excellent corrosion resistance and are lead-free. Since they’re lead-free, they can be safely recycled.

Inserts that meet ASTM standards comply with specifications for material quality.


According to customer samples or drawings, non-standard customized products

Product Packaging

E. Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Product Pictures

M10 Brass Tapered Heat-Set Inserts for Plastic

Contact Us

Tel.:

+86 020 8621 0320

+86 020 3121 6067

Mobile: +86 136 6007 9809

Technical Support:

SEND INQUIREY

Copyright © Guangzhou Juxin Development Co., Ltd. All Rights Reserved | Sitemap