JX-22JG534-M6-H14-28-ST, Nuts for riveting of carbon steel communication equipment sheet metal frames, surface treatment electroplating environmental protection ROHS color zinc

The up rivet nut is applied to sheet metal, thin plates, chassis, cabinets a fastener, up rivet nut has two shapes: hexagonal, the other for the cylindrical.

Pressed into the board are round, with no internal teeth. Generally, a thin plate in advance to open a good plate hole, rivet nuts into the plate hole, with the jig will be no internal teeth of the part from the inside to the outside up so that rivet nuts and thin plate up closely riveted. Up rivet nut is generally not hardened, to ensure its toughness, with the jig up, not only can make the components riveting tight, but also not crack the components up. Therefore, it is important to choose a good material when producing. So that the riveting nuts riveted tightly on the thin plate, to form an effective fixation in the thin plate of the internal thread. Up rivet nuts from the material are divided into fast cutting steel up rivet nuts Z NZ type, stainless steel up rivet nuts JX-ZS, JX-NZS type two; from the shape is divided into cylindrical up rivet nuts JX-Z JX-ZS; hexagonal up rivet nuts JX-NZ JX-NZS four, respectively, applied to different use environment. Materials are iron galvanized stainless steel models JX-Z JX-ZS M3 M4 M5 M6 M8 M10 M12 can be determined according to the different thicknesses of the plate model. Round riveting nuts and hexagonal riveting nuts are widely used in metal plates, control boxes and power cabinets, and other products of wall plate inlay processes.

Application technology

1. When choosing the rivet nut post, the thickness of the plate used must be based on, indeed the size range, mild steel plate hardness must be less than 70RB, and stainless steel plate hardness must be less than 80RB.

2. Free-cutting iron surface treatment, stainless steel to maintain the original color, the user can order according to the needs of the model specifications in the table, but also according to the need for special customization.

3. The plate hole size must be processed according to the tolerance size of 0-+0.075mm, and it is recommended to punch holes.

4、Installation must be achieved by "up riveting" operation, cut can not impact knock-in.

5. When stainless steel is selected as the material, the end number is indicated by "S".

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packaging & Delivery and Packaging Details

1. Shrink film+wooden box

2. Cardboard box+pallet

3. Color box

4. As per the customer's request