JX-21JG476-D38-18.3-H34-AL, CNC aluminum alloy machining parts manufacturing, applied to medical equipment parts

Most automobile cab parts are cover parts, complex shapes, complex forming, force is not large, using mold forming process, the forming performance of the material becomes the principal contradiction, so the material is required to have formability, tension rigidity, elongation, dent resistance, corrosion resistance, and weldability. Product design, usually according to the plate parts force situation and shape complexity to choose the steel plate varieties. Generally use low carbon cold-rolled steel plate with excellent tensile properties and ultra-low carbon cold-rolled steel plate. Phosphorus-containing cold-rolled steel plates with outstanding formability and higher strength, cold-rolled steel plates with high bowing degree, cold-rolled duplex steel plates, bake-hardened cold-rolled steel plates, ultra-low carbon steel high-strength cold-rolled steel plates, and other types of steel plates such as coated steel plates, welded steel plates, and TRIP steel plates are also used in large quantities for auto body parts such as outer door panels, door inner panels, door reinforcement panels, roof covers, luggage compartment covers and bumpers.CNC aluminum alloy machining parts manufacturing, applied to medical equipment parts medical equipment is divided into eight categories: X-ray diagnostic equipment, ultrasound diagnostic equipment, functional inspection equipment, endoscopy equipment, nuclear medicine equipment, experimental diagnostic equipment and pathological diagnostic equipment. Treatment equipment category is divided into 10 categories: ward care equipment, surgical equipment, radiotherapy equipment, nuclear medicine treatment equipment, laser equipment, dialysis treatment equipment, body temperature freezing equipment, and emergency equipment. Other treatment equipment includes hyperbaric oxygen chamber, high frequency electrochromic device for ophthalmology, electromagnetic suction iron, vitreous cutter, separator parts production and manufacturing solutions. Surface treatment black sandblasting treatment

CNC spare parts processing flow: When monitoring rough machining, the main consideration is to remove the excess capacity of the product surface layer quickly. During automatic processing, the CNC tool performs the milling process according to the set feed rate and the predetermined milling motion path. At this time, the operator should pay attention to observing the change of the milling load in the whole process of automatic processing and adjust the feed rate according to the bearing capacity of the CNC tool to make full use of the maximum efficiency of the CNC machine tool.

(1) After the CNC machining center is powered on, it is necessary to check whether the switch buttons and indicator lights are standard. If there is any abnormality, it must be shut down immediately and reported to the maintenance personnel.

(2) Before formal processing, the coordinates of the machining center should be returned to zero, and the machine can be operated after idling for more than 15 seconds.

(3) In order to simplify positioning and installation, CNC machining center www.juxinfasteners.com has a relative machining origin on every positioning surface and has precise coordinate dimensions.

(4) When installing, ensure that the stroke of the workpiece to be processed is within the stroke range of the spindle.

(5) When installing the workpiece, ensure that the workpiece is installed tightly, but also be careful not to be too tight and cause loss of positioning accuracy.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packing for CNC Aluminum parts:

1. Usual packing: By pearl cotton/bubble bag/plastic wrap + carton box, 0.5-10kg/carton box.

2. Special packing(for large part/large quantity order): By pearl cotton/bubble bag/plastic wrap +carton box+wooden box.

3. As customers' requirement for CNC aluminum parts