JX-21JG115-D10-D8-H16.3-SS, Stainless steel step hollow rivets are used in bus bar and electrical equipment

Material: iron, aluminum, copper, stainless steel, nylon PA66, PTFE, etc.

Surface treatment: environmental protection white zinc, environmental protection black zinc, environmental protection color zinc, dacromet, anodic oxidation, tin, zinc-nickel alloy, etc.

Features and principles: convenient and fast operation, flexible use, easy disassembly, and wide application.

①, When L＜L ref., e=0, and the method of diameter ds is omitted

②, Material: 

a) Steel, strength class (material): St, standard DIN EN 10087, DIN EN 10277-3 (these two material standards have been replaced by DIN EN ISO 683-4)

b) Stainless steel, strength class (material): A1, A2 according to standard DIN EN ISO 3506-1

c) Non-ferrous metals, strength class (material): CU3 according to standard DIN EN 28839

Hollow Stainless Steel Rivet, Step 304 Stainless Steel Rivet, Step Rivet, Used in High-Speed Trains

Stainless Steel Rivet, Stainless Steel Semi-Hollow Rivet, Stainless Steel 304 Rivet, Stainless Steel Step Rivet

Performance characteristics:

1. Shear resistance: Rivets in the structural connections of aerospace products primarily bear shear forces. Therefore, in general, rivet standards, and minimum shear strength requirements are specified. With improved testing methods and standards, dual shear specifications are increasingly being adopted. Dual-shear testing provides more accurate and reliable results compared to single-shear testing.

2. Joining performance: Joining performance refers to the formation requirements of the rivet head after riveting. The quality of the rivet head formation directly affects the riveting quality. Ordinary rivets for general use do not have specific requirements for joining performance. Joining performance and strength are two conflicting indicators, where higher strength results in poorer joining performance. Typically, the height of the rivet head after riveting is 0.35d-0.4d, and the diameter of the rivet head is above 1.4d. Strict requirements are also in place for cracks that may appear on the rivet head, allowing cracks only on the cylindrical surface of the rivet shank and not extending to the top surface. The total number of cracks should not exceed 3, and the width and depth should not exceed 0.07mm.

Other related products include Hardware screws, PA self-tapping screws, PWA self-tapping screws with washers, Step screws, Cup head hex screws, Countersunk hex screws, Round head hex screws, External hex screws, Countersunk machine screws, Round head machine screws, Machine screws with washers, Countersunk self-tapping rivets, Semi-hollow rivets, Solid rivets, Internal hex screws, Cup head internal hex screws, Triple combination screws, Round head triple combination screws, External hex triple combination screws, Expansion screws, Thumb screws, Threaded rods, Set screws, Hex nuts, Flange nuts, Anti-loosening nuts, Cap nuts, Flange anti-loosening nuts, Square nuts, Round head cutting tail self-tapping screws, Welding nuts, Wing nuts, Dowel pins, Flat washers, Spring washers, Tamper-resistant screws, Solid rivets, Semi-hollow rivets, CNC rivets, Step rivets, etc.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packaging & Delivery and Packaging Details

1. Shrink film+wooden box

2. Cardboard box+pallet

3. Color box

4. As per the customer's request