Stainless Steel Toothed Groove Elastic Cylindrical Pin for automotive, High-performance solutions for automotive applications

High-performance solutions for automotive applications

Threaded Inserts and Compression Limitersin Sunroof Assemblies

Coiled PinsSolid Pinsin Fuel and Oil Pumps in Glovebox LatchesCompression Limiters and Threaded Insertsin Pedal Boxes

Spacersin Alternators, Compression Limiters Air Manifolds

Compression Limiters Thermostat Housings, Compression Limiters Timing Belt Covers, Spacersin Expansion Tanks, Dowel Bushings in Engine Heads, compression LimitersFuel Rails, Ground Hollow Dowels Transfer Case, and EngineCoiled Pinsin lenition Coils, Threaded Inserts Headlamp Assemblies, Coiled Pins Android Pinsin Interior Handles

Spacersin JacksCoiled Pinsin Trunk LatchesCoiled Pinsin Gas StrutsSolid Pinsin Trunk 12V SocketsCoiled Pinsin “Flick” Key FobCoiled Pinsin Drum Brake AssembliesThreaded Insertsin Bumper Moldings, Spacersin Muffler HangerCoiled Pinsin Seat Adiust MechanismsSolid Pins and Compression Limitersin Grab Handles

Coiled PinsThreaded Insertsin Steering Columns as Shear Pins in Door TrimsHeaded Coiled PinsSleevesin ABS Pumpsin Seat Adjust Handles

Ground Hollow Dowelsin Lower Engine Block, Coiled PinsCoiled Pins and Dowel Bushings in Manual Transmission Shift Linkage Gearbox and Transfer Cases, Coiled PinsCoiled Pinsin Automatic Transmission Shifter Housing Brake and Clutch Master Cylinders, Solid Pinsin Transmission Valve Body, Coiled Pins and Solid Pinsin Exterior Handles

Coiled Pinsin Camshafts, Spacersin Chassis Frame Bracket.

Elastic toothed cylindrical pin, also known as a spring pin, is a headless hollow cylindrical body with axial slots and chamfers at both ends. It is used for positioning, connecting, fixing, etc. between parts; it needs to have good elasticity And shear resistance, the outer diameter of this type of pin is slightly larger than the assembly hole diameter.

Material: carbon spring steel, stainless steel

According to the thickness of the material and the width of the chamfer, it can be divided into a light elastic toothed cylindrical pin and a heavy elastic toothed cylindrical pin

Surface treatment: The conventional surface treatment of elastic-toothed cylindrical pins is oxidation blackening, phosphating, and non-electrolytic zinc flake coating. Since the hardness range of elastic-toothed cylindrical pins is within the hardness range of high susceptibility to hydrogen embrittlement, electro-galvanizing treatment is not recommended. It should be noted that due to the low adhesion of the electrolytic zinc flake coating, the coating may peel off when the spring pin is deformed.

Inspection, installation, and use:

1. Check the appearance of the elastic-toothed cylindrical pin used before installation. No cracks, floating rust, scale, bumps, or burrs that affect the users are allowed on the surface; knocking on the pin end before assembly is prohibited part, deforming the pin.

2. When installing a single elastic toothed pin, the direction of the notch should be knocked in at 90° to the direction of rotation of the shaft. When installing a double elastic pin, the notches of the two elastic pins form an angle of 180° and are at a 90° angle to the direction of rotation of the shaft. 90°. When installing, the outer pin should be knocked into about 2/3 first, and then the inner pin should be installed, and after knocking into the pin hole together, the exposed parts at both ends should be roughly equal.

3. After installing the elastic pin, black paint should be painted on the knocking end to prevent rust.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packaging & Delivery and Packaging Details

1. Shrink film+wooden box

2. Cardboard box+pallet

3. Color box

4. As per the customer's request