JX-22JG523-M6-16-ST, Torx Drilling Screws for Joining Wood to Metal for automotive

Non-standard Alloy Steel Ultra-Low-Profile Torx Head Screws. Made from alloy steel, these screws are nearly twice as strong as stainless steel ultra-low-profile screws. Their black-oxide finish provides mild corrosion resistance in dry environments. To fit in the tightest spaces, they have a head that's about one-third the height of a standard socket head, but their low profile makes their head weaker. Not recommended for critical fastening applications. Length is measured from under the head. Coarse threads are the industry standard; choose these screws if you don’t know the pitch or threads per inch. Fine threads are closely spaced to prevent loosening from vibration. They are not compatible with coarse threads.Made of alloy steel, these low-profile screws are nearly twice as strong as their stainless steel counterparts. With half the height of a standard socket head, these low-profile screws fit in tight spaces but are weaker than standard socket heads. Length is measured from under the head.

Black-oxide steel screws are mildly corrosion-resistant in dry environments. Zinc-plated steel screws have a zinc outer layer that protects the steel under them from rust, extending the life of the screw.

1. Tamper-Resistant Rounded Head Drilling Screws for Metal: A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess. They save you time and effort by drilling their own holes and fastening in a single operation. Made from 410 stainless steel, they're strong, wear-resistant, and mildly chemical-resistant. Not for use with aluminum. Length is measured from under the head.

2. Steel Pan Head Torx Screws: These screws have a Torx or Torx-Plus drive for more points of contact than other drives, allowing you to tighten the screw without damaging the recess. For Torx tools, see Torx and Torx-Plus bits, keys, and drivers. Torx-Plus screws can be used with both Torx-Plus and Torx tools. Length is measured from under the head. Zinc-plated steel screws resist corrosion in wet environments. Black corrosion-resistant-coated steel screws resist chemicals and withstand 196 hours of salt spray.

3. Strip-Resistant Screws for Sheet Metal: these offer more thread engagement in 0.028" to 0.063" thick sheets to prevent overtightening and damaging threads. They're made from steel and have zinc plating to resist corrosion in wet environments. Length is measured from under the head.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packaging & Delivery and Packaging Details

1. Shrink film+wooden box

2. Cardboard box+pallet

3. Color box

4. As per the customer's request