Automotive mechanical parts, surface treatment zinc-nickel alloy for brake pedal assemblyJX-21QJG314-D6.2-19.63-ST

Technical requirements: 

1 Material DIN EN 10277-3 11SMnPb30 and surface treatment GS 90010-1 ZNT

2. Standard: DIN EN ISO 2338

3. Mounting hole 6+ 0.1 0mm;Compared to galvanization, zinc-nickel alloy exhibits significantly improved corrosion resistance. Under the condition of an equal coating thickness of 8μm, after passivation and sealing treatment, it can achieve 240 hours of surface without white rust and 1000 hours without red rust. Additionally, it meets the requirements for high-temperature resistance. However, zinc-nickel alloy still has a slight susceptibility to hydrogen embrittlement. For automotive fasteners with a tensile strength greater than 1000 MPa, necessary verification is required before use to reduce quality risks.

1215 steel material

1. In terms of appearance, this steel has various specifications. Because of the different designs, its molds have many different shapes, and the cut shapes are also different. But it is not particularly laborious in the cutting process, and its angle can be a right angle, rounded angle, or various angles we need.

2. The precision of this product is very high, that is to say, the size after leaving the factory is relatively uniform, without too much error, it is very convenient in the process of later use, and the overall effect is also very good.

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packaging & Delivery and Packaging Details

1. Shrink film+wooden box

2. Cardboard box+pallet

3. Color box

4. As per the customer's request