Aluminum alloy automotive parts machining, JX-21JG455-M6-17-AL, CNC aluminum alloy machining auto parts combination parts, auto engine parts Throttle body, auto engine, auto engine assembly, auto oil pump, oil nozzle, tensioner wheel, cylinder block, shaf

Process characteristics of aluminum alloy automotive parts machining: 

(1) It can reduce the influence of residual stress on machining deformation. After the completion of rough machining, the use of heat treatment is to remove the stress generated by the rough machining of the part to reduce the impact of stress on the quality of finishing.

(2) Improve machining accuracy and surface quality. After the separation of roughing and finishing, finishing is just a small machining allowance, machining stress, and deformation is small, greatly improving the quality of the parts.

(3) Improve production efficiency. Rough machining only to remove excess material, finishing leaving enough margin, without regard to size and tolerance, play the performance of different models of machine tools to improve cutting efficiency. After the aluminum parts are cut, the metal organization in the machining table will be greatly changed. The effect of cutting movement can lead to greater residual stresses. Reducing the deformation of the part requires full release of the residual stresses in the material.

1. Provide CNC (computer gong, machining center), CNC lathe, ordinary lathe, milling machine wire cutting, EDM, multi-axis (3-axis/4-axis/5-axis) processing services, fast proofing, the batch price advantage is prominent metal, non-metallic materials can be processed, to provide processing, post-processing one-stop service; maximum processing size: maximum 2200mm (demolition parts are no size restrictions)

2. aluminum alloy: 6061/6063/7075/2A12/LY12 stainless steel/steel: 303/304/310/310L/316/316L/45 steel/40Cr/Q235; other metals: brass, copper, magnesium alloy, alloy, pure iron, etc.: non-metal: ABS/PC/POM steel/PVC/PPS/PEEK / Bakelite / Teflon PTFE acrylic (Plexiglas) / nylon + glass fiber, etc.

3. Surface treatment: sandblasting, hard anodizing, micro-arc oxidation, grinding, polishing, oil spraying, blackening, electroplating, vacuum plating, chemical plating, phosphating, passivation, silk-screening, nibbling, and most of the surface post-treatment processes

Packing: Inner is Poly foam, out is carton. Then pallet. Carton size: 29*19*19.5CM and 23.5*17.5*8, CM and pallet size is: 215*100*90CM, or as your requirement.

Packaging & Delivery and Packaging Details

1. Shrink film+wooden box

2. Cardboard box+pallet

3. Color box

4. As per the customer's request